Motorcycle Cables & Brackets

All motorcycles use cables to operate the throttle and clutch. Some models can also be equipped with cable-operated rear brakes. They are attached to the corresponding levers on the handlebars. The cable itself consists of three main components: outer cable (protective cover), inner cable, and cable end clamps. Front brakes are usually operated by the hydraulic pressure transferred via the brake line from the main cylinder on the handlebar to the pistons in the brake caliper. Maintaining your motorcycle cables and brackets in perfect working order is just as important as changing oil, cleaning the air filter, lubricating the chain drive, and checking the tire pressure.

Unfortunately, many motorcycle riders tend to neglect to service their control cables, which can ensure the long and trouble-free operation of their machines. Depending on the conditions in which you are riding and the type of your motorcycle, it is recommended to lubricate throttle and clutch cables often to prevent them from getting stuck leading to potentially dangerous situations. You need to do it more frequently on a dirt bike than on a street motorcycle due to the dust and dirt that can get stuck to the inner wires. Inspect your cables for any signs of wear. If the housings or fittings are damaged, it is time to invest in new cables.

Also, if you notice that the vinyl coating on your cables is cracked, it means that the lubricant can escape allowing moisture and debris to get in. When you feel that it is getting harder for you to operate your clutch or throttle, it may be the sign of your cables starting to stick. Another necessity for longer or shorter control cables may emerge due to the installation of new, higher or lower handlebars of a different style. Instead of replacing your old cables with their vinyl-coated analogs, you can opt for armored cables with braided outer housings featuring crystal clear protective coatings. Their metallic look can give your motorcycle a truly custom appearance.

On the digital shelves of our online store, we have gathered a wide array of premium quality motorcycle cables and brackets by some of the most respected manufacturers in the game, such as Burly Brand, Biker’s Choice, Barnett Clutches, Motion Pro, Outlaw Racing, and many others. Here you can find only durable and reliable throttle and clutch cables with black vinyl or stainless steel braiding with clear protective coatings for all kinds of motorcycles of different styles. You can opt for a complete kit of extended cables and brake lines that includes everything you might need for the installation of aftermarket handlebars.

Remember to always keep your cables clean and well-lubricated. Inspect them regularly for the signs of cracking, bending, or kinking at the controls. Make sure no dirt or water is trapped inside rubber boots and covers. For lubrication, use only light viscosity oil or water displacement sprays. It is not recommended to use grease or heavy oils, especially chain lube, because they may attract dust and sand which may bind up your cables. Most of the time, cables break at the clutch lever or throttle when fittings cannot pivot freely causing cables to bend. Keep your fittings and brackets lubed to extend the service life of your cables. Always take an emergency repair cable clamp with you on the road to avoid getting stuck in the middle of nowhere with an inoperable clutch or throttle.