Name: FRAM® CH6098 - Oil Filter
Brand: Fram
SKU: mpn1335653675
Price: 9.39 USD
Availability: Discontinued

Vehicle Fitment

This part is universal

Product Details

Oil Filter (CH6098) by FRAM®. This unit provides better engine protection by trapping contaminants and the smallest dirt particles. It filters 100% of the oil before it reaches the engine and bearings. Extra Guard Full-Flow Spin-On Oil Filters utilize cellulose and synthetic media providing 3 times more protection.

Specifications

Oil Filter Type: Cartridge

By-Pass Valve Settings: 22.8-28.4 psi

Filter Height (in): 1.706"

Inside Diameter (in): 0.402"

Outside Diameter (in): 1.497"

Inside Diameter Bottom (in): 0.276"

Gasket Inside Diameter (in): 1.497"

Gasket Outside Diameter (in): 1.576"

Gasket Thickness (in): 0.079"

O-ring (1) Inside Diameter (in): 1.379"

O-ring (1) Outside Diameter (in): 1.458"

O-ring (1) Thickness (in): 0.079"

O-ring (2) Inside Diameter (in): 0.749"

O-ring (2) Outside Diameter (in): 0.827"

O-ring (2) Thickness (in): 0.079"

Features

Features Features Meets or exceeds all original equipment specifications
Application-specific design for a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

The first FRAM® filter was designed about 85 years ago by two chemists, Frederic Franklin and T. Edward Aldam. These scientists created a unique replaceable oil filtering element that was easier to use than standard filters which were difficult to install and change. Today FRAM is a leading manufacturer of oil, fuel, air filters and PCV valves. It offers a wide range of high-quality filters for passenger cars, SUVs, light trucks and commercial vehicles. The company utilizes a number of patented technologies that ensure maximum engine protection and superior engine performance.

Brand:

Fram

Part Number:

CH6098

UPC:

009100537966

Warranty

FRAM® LIMITED WARRANTY

FRAM® filter products manufactured or sold by FRAM Group Operations LLC are warranted to their original purchaser to be free from defects in material and workmanship for the duration of the original equipment recommended change interval and FRAM® hard parts (filters and hard parts are collectively referred to as, “Products”) are warranted to their original purchaser to be free from defects in material and workmanship for one (1) year from the later of the date of purchase or the date of installation. This warranty covers properly installed or utilized Products. This warranty does not cover any Product that: a) has been subject to misuse, neglect, negligence, accident or casualty; b) has been improperly installed; c) has been installed into an engine which is not referenced as a conforming application; or d) has remained in service beyond the original equipment recommended change interval.

Any Covered Product which is determined by FRAM Group Operations LLC to be defective will be replaced at no charge. In the event of an engine or equipment failure directly caused by a Covered Product, FRAM Group Operations LLC will provide the lesser of the: i) restoration of the engine or equipment to a condition equivalent to that existing just prior to the failure or ii) cash payment of the fair market value of the vehicle. To the fullest extent allowed under applicable law, FRAM Group Operations LLC disclaims all implied warranties and conditions and any and all consequential, incidental and special damages. Some jurisdictions do not permit the exclusion of such warranties or damages, so this disclaimer may not apply to you.

This warranty gives you specific legal rights. You may have other rights which vary from jurisdiction to jurisdiction.

VEHICLE MANUFACTURERS’ WARRANTIES

In the United States: Use of FRAM® products will not void your Original Equipment warranty. A manufacturer may not require the use of any brand of filter unless either the manufacturer provides the filter for free-of-charge under terms of the warranty or the manufacturer successfully demonstrates to the Federal Trade Commission that its product will not work properly without a specified item or service. To date, the FTC has not made any such determination for filtration products. If a manufacturer makes a claim that using a FRAM® product will void or has voided your warranty, ask the manufacturer to provide this statement in writing.

Outside of the United States: FRAM® processes warranty claims on a world-wide basis. The use of aftermarket parts during applicable warranty periods may impact the manufacturer’s warranty. Check the terms of your Original Equipment warranty which may require the use of a specific brand of filter for a valid warranty claim.

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

FRAM® CH6098 - Oil Filter

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!