| Make | Model | Year |
|---|---|---|
| Honda | CBR250RR | 1995-1996 |
| CBR300R | 2015-2021 | |
| CBR500R | 2013-2015 | |
| Grom 125 | 2016-2020 | |
| XL1000V Varadero | 2001-2010 | |
| XL600 Transalp | 1994-1999 | |
| XL700V Transalp | 2008-2011 | |
| XR400R | 1996-2004 | |
| XR650L | 2008 | |
| XR650R | 2000-2007 | |
| Kawasaki | BX250 Ninja 250SL | 2015 |
| KLX125 | 2010-2014 | |
| Ninja 250R | 2008-2012 | |
| Ninja 300 | 2013-2017 | |
| Yamaha | WR250X | 2008-2011 |
| XT660R | 2004-2016 | |
| XT660X | 2010-2016 | |
| YBR125 | 2014-2015 |
Front Oblong Black Aluminum Brake Reservoir Cap by Pro-Bolt®. Unique idea and nifty engineering. Superb smooth finish in your choice of colour literally in your face. Get rid of the ugly black plastic stock originals. They offer a wide range of reservoir caps to fit Front Brake, Clutch and Rear Brake Cylinders on a huge range of models. Comes complete with countersunk bolts where necessary. Measurements are the outside diameter. Use your original membrane. Material High Tensile Anodised Manufactured from 7075T6 aluminium, and suitable for use in all non-safety critical areas. During manufacturing, the head is cold formed and the shank thread rolled. The anodising involves chemically brightening and colour anodising to between 8 and 12 microns thick. They offer Race Spec Drilled Flanged Hex Head, Socket Cap Bolts, Countersunk Bolts, Dome Head Bolts, Nuts and Washers - from 3 mm to 10mm.
| Bar Code: 5053573539397 |
| Material: Aluminum |
| Product Type: Reservoir Covers |
| Weight in Gms: 20.4400 |
| Length: 55mm |
| Width: 6.2mm |
| Height: 6.2mm |
| Density: 2730kg/m3 (170lb/ft3) |
| Young's Modulus: 72GPa (10.4 x 106 psi) |
| Yield Strength: 505MPa (73.2 x 103 psi) |
| Ultimate Tensile Strength: 570MPa (82.7 x 103 psi) |
| Compressive Strength: 505MPa (73.2 x 103 psi) |
| Shear Modulus: 27GPa (3.92 x 106 psi) |
| Shear Strength: 330MPa (47.9 x 103 psi) |
| Ductility: 10% elongation at break |
| Poisson's Ratio: 0.33 |
| Hardness: 150 Brinell |
| Strength-to-Weight Ratio: 185 kNm/kg |
| Stiffness-to-Weight Ratio: 26.4 Mnm/kg |
Whether you are looking to rebuild a bike, reduce unsprung weight on a track day bike or customise your Streetfighter, Sports Bike, Superbike or Offroader they can support your project. As well as supplying fasteners to individual riders they supply race teams in MotoGP™, Moto2™ and Moto3™. Outside the paddocks Pro-Bolt® fasteners are used on racing yachts, Forumla1 cars and drones and also by specialist car manufacturers, the aerospace and sub-marine sectors. Pro-Bolt® products are available in Aluminium, Stainless Steel and Titanium with each material offering its own benefits and strengths, depending on the application.