Product Details
Universal LED Flasher Relay by Puig®. Color: Black. If you are looking for uniform and intense turn signals, acquire Puig Relays. Most motorcycles use bimetallic relays. Its frequency (which is the one that marks the rhythm of the intermittence) depends on the amperage that circulates through the circuit. When replacing the original turn signals with others of different power, Puig vary the amperage that circulates through the circuit and consequently Puig vary the blinking frequency of the turn signals. If, on the other hand, the motorcycle uses electronic relays (whose frequency is independent of the amperage circulating in the circuit), the change of turn signals should not affect the frequency of flashing.
Notes
- In case of doubt about which relay uses your motorcycle, it is advisable to mount the turn signals and check the blinking frequency
- In most models the use of resistances prevents the correct functioning of the "Warning"
- There are some motorcycles on the market that do not have a specific flasher relay, so it is impossible to replace it. Likewise, if in the intermittence procedure, more than one relay intervenes, it is possible that the replacement of a single relay does not solve the problem
Features
- Engineered to fulfill your needs
- Will push the limits of high quality and value
- Refined workmanship and superior longevity
If Puig replace the original turn signals with others that also use incandescent bulbs, Puig should check that they have the same power. In case that it varies, Puig should replace the intermittent bulbs with others of the same power as the original ones. In Puig catalog Puig have boxes of light bulbs of different powers.
If Puig replace the original turn signals with others of LED (of a power much lower than incandescent bulbs), Puig have two options to balance the blinking frequency:
- 1. Incorporate a resistance in parallel in the circuit of the right side and another in the circuit of the left side. If Puig replace the four flashing lights, Puig must use resistance ref.4298O. If, on the other hand, Puig only replace two intermittent ones (one on each side) Puig must use the resistance ref.5873O
With the resistors, a diagram is provided for its parallel connection.
- 2. Identify the flasher relay of your motorcycle (location and number of pins) and replace it with the corresponding one from the list Puig offer.
On most motorcycles when changing the relay the "Warning" works correctly.
Puig® design, produce, and distribute its own products since 1964. The experience gathered during these years is applied directly to each designed product, and for this reason Puig has achieved the trust and loyalty of many professional pilots and street riders that have used and keep using Puig's products. Puig hopes you can keep trusting company on your next accessories purchases. Puig's main objective is, as always, work in order to improve and ease the motorcyclist's life.