Name: Wiseco® W6076 - Nylon Soft Hone Brush (57-70 mm (2.24"-2.76"))
Brand: Wiseco
SKU: mpn4642638067
Price: 99.95 USD
Availability: OutOfStock

Vehicle Fitment

This part is universal

Product Details

Universal Nylon Soft Hone Brush (W6076) by Wiseco®. Wiseco supplies honing brushes in multiple sizes to assist in your rebuild. These nylon soft hone brushes assure a proper ring seal in Cast Iron Sleeved Cylinders. These brushes along with a cross hatch sanding will assure your rings will seal properly and have adequate lubrication. Because the boring or honing process can be different based on cylinder type, please contact an engine builder to receive further instruction if you should have any questions.

Specifications

Overal Length: 10"

Outer Diameter: 3"

Bore Range: 57-70 Mm (2.24"-2.76")

Features

Expertly crafted utilizing advanced technologies
Designed to provide exceptional quality and durability
Made from high-quality materials for excellent durability and safety

Cast Iron Sleeved Cylinders:
To ensure proper ring seal, it is necessary to hone the cylinder with a rigid or brush hone. DO NOT install a new piston without honing the cylinder to break the glaze. Finish hone with a 280 grit. Cross hatch is necessary to ensure proper ring seal and adequate lubrication. If the cylinder is in good condition, simply honing the cylinder may be enough to restore the bore to an acceptable condition. However in some cases, boring may be necessary to insure the cylinder bore is within the tolerances outlined in the service manual.

Plated Cylinders:
(Includes nickel ceramic coatings (Nikasil), chrome, Electrofusion, and boron composite.) If the plated cylinder is in good condition, honing may not be necessary. If deglazing is necessary, DO NOT use a ball hone. Use a rigid or brush type diamond hone. Plated cylinders cannot be bored oversize without replating or resleeving.

Any time a cylinder is bored or honed:
All ports must be chamfered. The top of the cylinder should be deburred, and the bottom should be generously chamfered for ease of piston and ring installation. When boring a cylinder with an exhaust bridge, the face of the bridge must be relieved .002"-.004" to allow for bridge expansion. Without proper bridge clearance, engine damage could occur.

Exhaust Power Valves (2-Stroke engines):
When boring cylinders with exhaust power valves the exhaust power valve must be inspected to ensure it does not extend into the cylinder. The exhaust power valve must have approximately .015" clearance from the cylinder bore. Without proper clearance, the exhaust power valve could contact the piston and engine damage could occur. If machining the exhaust power valve is necessary, remove metal only in the area that extends into the cylinder bore.

Wiseco® began the manufacture of pistons 70 years ago when founder Clyde Wiseman started making them in his garage. The pistons he made at that time were destined for use in big bore marine engines, and like so many successful companies that began in people’s garages, word of what he was doing spread and soon he was making pistons for friends and so business began to grow. When Wiseco was officially formed in 1941 it serviced the needs of racers and powersports enthusiasts, and today the powersports sector – predominantly motorcycles and ATVs – now accounts for the largest portion of the work done by the business.

Brand:

Wiseco

Part Number:

W6076

Warranty

Wiseco warrants its products will be free from defects in material and workmanship for thirty (30) days following date of original purchase. If the product is found by Wiseco to be defective, such products will, at WISECO’S option, be replaced or repaired at cost to Wiseco.

This limited warranty does not cover labor or other costs or expenses incidental to the repair and/or replacement of products or parts.

This limited warranty does not apply to any product which has been used in a hi-performance application, or racing, or is subject to misuse, mishandling, misapplication, neglect (including but not limited to improper maintenance), accident, improper installation, modification (including but not limited to use of unauthorized parts or attachments), or adjustment or repair performed by anyone other than Wiseco.

The parties hereto expressly agree that the purchaser’s sole and exclusive remedy against Wiseco shall be for the repair or replacement of the defective product as provided in this limited warranty. This exclusive remedy shall not be deemed to have failed of its essential purpose so long as Wiseco is willing and able to repair or replace defective goods.

This limited warranty is in lieu of all other warranties, express or implied, including those of merchantability or fitness for a particular purpose not expressly set forth herein. Any product which may be sold by Wiseco but which is not manufactured by Wiseco is not warranted by Wiseco, but is sold only with the warranties, if any, of the manufacturers thereof.

Wiseco's liability (whether under the theories of breach of contract or warranty, negligence or strict liability) for its products shall be limited to repairing or replacing parts found by Wiseco to be defective, or at Wiseco's option, to refund the purchase price of such product. In no event shall Wiseco be liable for incidental or consequential damages arising out of or in connection with the product. Consequential damages shall include, without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person, or loss of or damage to property.

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Wiseco® W6076 - Nylon Soft Hone Brush (57-70 mm (2.24"-2.76"))

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!