Brake Parts
Cooling Parts
Drivetrain & Transmission Parts
Electrical Parts
Engines Parts
Exhaust Parts
Foot Controls & Pegs
Frame & Body
Fuel Parts
Handlebars & Controls
Ignition System Parts
Mounts & Hardware
Performance Chips & Programmers
Racing Exterior & Body Parts
Starting & Charging Parts
Suspension Parts
Windshield & Fairings
Repair Manuals
Brake Parts
Cooling Parts
Drivetrain & Transmission Parts
Electrical Parts
Engines Parts
Exhaust Parts
Foot Controls & Pegs
Frame & Body
Fuel Parts
Handlebars & Controls
Ignition System Parts
Mounts & Hardware
Performance Chips & Programmers
Racing Exterior & Body Parts
Starting & Charging Parts
Suspension Parts
Windshield & Fairings
Repair Manuals
I do a lot of ranch work, I installed this bumper and it has already taken a couple of hits with no damage. The install was easier than I expected. The factory camera still works great.
This bumper is rock solid! It looks nice. The powder coating seems like it'll last forever. The only downside is that it doesn't have sensor cutouts. Otherwise, it's been a fantastic upgrade.
Needed a heavy duty bumper for off-roading. Love that this one has solid construction and the design adds a rugged look. It fits well.
I wanted a rear bumper that could handle my off-road trips and still look good for daily driving, this one nails it. It looks awesome The steel feels solid enough to outlast the truck.
Another vehicle backed into me, I was sure my truck would be damaged. But this bumper took the impact like nothing, no scratches, no dents. Best investment I've made! It's already paid for itself!
Solid bumper, feels really heavy duty. The powder coat finish looks nice, it should hold up well. The install took about 2 hours but was fairly simple.
What a great product fit’s as it should lots of adjustment very well made. Need to trim inner finders very pleased. I am wondering if there is a skid plate available?
As title says, this requires elbow grease. I had to cut out of the factory bumper to align and have the original bumper fit. Thereafter, I put the strip lining over the cutout to give a smoother affect then put the rest of the bumper on.
I received the Hiline front bumper, is well made, very sturdy. This was first time installing a bumper and it wasn't hard. Yes, it took about 6 hours but I took my time especially on cutting the plastic trim. My truck does have a 3&1 leveling kit.
Added weight to the back of the truck changes the handling, poor performance as a result. The bumper does not have slots designated for plate lights, so you have to find other options for that and then adjust the wiring. The mount completely blocks the back-up camera next to the tailgate handle. If you want to keep that option, you have to buy an aftermarket kit to install the camera somewhere else. The assembly adds at least another foot onto the length of the truck. The mount is not tight to the tailgate and the weight of the tire causes the carrier to sag.
Assembly is heavy; changes truck handling. License plate lights need to be purchased separately and re-wired. Assembly completely blocks back-up camera located next to tailgate handle. You can find other after-market back-up camera solutions, but you'd have to re-route the connections through the tailgate and bumper. $1,000 isn't really worth the hassle of customization of wiring harnesses in my opinion. And, the assembly adds at least another foot onto the length of the truck; the mount isn't tight to the tailgate.
Yesterday I got the bumpers from America and installed them right away. The bumpers are of super stable quality and look brutal. Even in connection with a trailer coupling, there were no installation problems.
When I unwrapped the parts I noted a couple of problems. The coating on the front hoop was rubbed off in one small area but hey, it will get scuffed later. I went to bolt the hoop on and one of the welds on the mount tab was so close to the bolt hole, the washer would not lay flat. The welded on anchor point was not welded square, it points to the right a bit. Shipping was fast and the install was easy.
Great product, bid, looks awesome on my Jeep JK. Have not had to use them, hopefully never will unless I'm pulling some else. JC
Very nice, well made.
Heavy duty, well built, easy to install, worth every penny.
Love the look of it, makes my OEM look like cardboard, but had to undo a few wires, re-route my trailer brake harness to get to mount position and you have to splice in the tag light they send you.
The bumper fits well, but could use a little more car in the fine trim areas.
Exactly as represented on the website.
Great looking bumper, well made. Gives my truck a awesome look!
FYI the trailer power plug doesn't fit on my 2019 Tacoma TRD Sport. You will need to make modifications to get it to fit right. I also had to add my owner "spacers" to get the height right. It sits too low with the provided spacers and looks like crap. The matte coating is already coming off as well. Meh..
Looks like what I ordered. Haven't installed yet because I need other parts yet, but looks good.
100 percent better than what came on truck. Installed easy.
Solid build. Sturdy and painted great. Easy install with just 6 bolts. Clean lines and fits snug. Best price bumper and would highly recommend.
The best.
I love the look of this bumper. I bought the lights separately and they fit perfectly. The only complaint I have is that my truck is the Rebel and the OE grille is not compatible with this bumper. Unlike some of the other owners, I have not had any issue with rattling or noises as I drive down the road, yet. Overall I am pleased.
At first the finish seems to be durable. The shackle mounts were easily scratched during installation. Not a major issue, but was not expected either. There is not a suitable location to mount for those states requiring a front license plate. There are no directions. Again, not a major issue as installation is fairly strait forward, but should be noted. A template for cutting the body would be nice, but not that hard to lay out. Not the stoutest bumper out there, but should be sufficient for most people.
Looks great! Easy to install, hardest part was cutting the factory bumper for under the headlights, but on a difficulty scale 1-10 it’s about a 3 if you have all the tools.
When you get it, open all packages. Made the mistake of modifying the center light bar brackets for the lights. They include the brackets inside the bumper box. Use recommended lights! I used 6" lights on the sides and had to redrill holes 3x before I got it right. With the 3" square lights....no drilling required. Over all, bumper looks good and went on fairly easy with 1 other person. Very happy with it.
The bumper looks great! Installing takes a bit of time and the bumper has no play. The drivers side sits flush and the passenger was about 1/8th from being flush to the fenders. This seems to be an issue with all bumpers of this of this style. The bumper did bring the front down out of level. I have billies up front set at 2.5 and an aal in the rear. I would/will be adding some stiffer coils but it’s not necessary.
Light weight with a tough looking finish. Easy to install. Lining up too a little bit, but it came out very nice. Doesn't fit my OEM fog lights, so I will be picking up either the ones they offer or ones of similar size. Looks odd without the front LED and fog lights, so I recommend buying them.
Solid bumper and looks clean. Not over done like most bumpers. Easy to install make sure to buy body armor lights to make the install easier.
Easy to install and look good.
Looks good and had no issues installing it. Much better quality bumper than what Ford had on it.
Bumper arrived undamaged and well packed mounting brackets and bolts are supplied very nice finish, with that said the bumper does not have the best fit and even with torquing all the bolts to spec it still rattles going down a bumpy road or just casually driving around town. If it wasn't for the clunky noises going down the road I would recommend this bumper however I cannot do so.
Really like this bumper. Very easy install. Took an hour ro remove the old and install the new. Looks great with no issues. It could have been built with another tag light on the left side but still a very functionally good looking bumper. Really doesn't need to be welded at the mounting locations but I had mine welded up anyway for piece of mind. The price was a little steep but still a lot of bang for the buck. I'm please with the bumper.
Body Armor 4x4 was founded over ten years ago with the vision to provide high quality durable products for the off-road community. Our products are engineered to stand up to abuse and function while enhancing the looks of the vehicle that they are installed on. At Body Armor 4x4 we are committed to providing innovative products for the off-road enthusiast.
Subscribe to our newsletter to receive exclusive offers, product recommendations, expert tips and more.